ME 228 Computer Graphics

Task in ME 228 Computer Graphics

A. Follow the Chapter 12 tutorial from pages 12-5 to 12-28. Create a drawing file with three standard views. Add the 3 standard views. From the top view, create a full section view that displays the thickness of the shell of the dryer. You do NOT need to add dimensions to this drawing sheet. Submit both the part file, drawing file, and pdf of the drawing. ME 228 Computer Graphics

B. Model the Trombone Body shown on the second page of this assignment. Use the loft, sweep, and shell tool for full points. From the top view, create an appropriate full section view. This section view will take the place of the front view of the part and show the thickness of the trombone body. You do NOT need to add dimensions to this drawing sheet. Submit both the part file, drawing file, and pdf of the drawing.

C. Download the Blade Hub from blackboard. Create a drawing sheet with a front view. From the front view create two section views on the sheet, a half section view that will become the top view of the part and an full section, auxiliary view so that the profiles of the screw holes can be seen. You do NOT need to add dimensions to this drawing sheet. Submit only a pdf of the drawing.

D. Complete the following workbook pages neatly. Please use a straight edge when you can and a template if you have one. Scan or take photos of the pages and upload to assignment 8. 
ME 228 Computer Graphics